Skip to product information
1 of 6


Portable 12V Car Battery Booster: EAFC Jump Starter Power Bank

Portable 12V Car Battery Booster: EAFC Jump Starter Power Bank

Regular price $140.00 AUD
Regular price Sale price $140.00 AUD
Sale Sold out
Shipping calculated at checkout.
Ships From



Ensure safe and effective use of the product with these guidelines:

  • For gasoline vehicles up to 3L: Peak current 600A
  • For petrol cars up to 4L and diesel cars up to 2L: Peak current 1200A
  • For petrol vehicles up to 6L and diesel vehicles up to 4L: Peak current 2000A

Important Safety Tips:

  1. Upon receiving the product, activate the flashlight to discharge fully. Charge the product for over 4 hours before starting your car to prolong its lifespan.
  2. Before jump-starting, ensure the battery terminals are clean.
  3. Properly attach the clips to the battery terminals, ensuring stability and avoiding short circuits.
  4. After successfully starting the car, remove the clips within 30 seconds to prevent damage to the clip's fuse box.

Precautions Before Use:

  1. Avoid continuous ignition attempts within 30 seconds.
  2. Ensure proper polarity connection and avoid short-circuiting the clips.
  3. Promptly remove the clips within 30 seconds after starting the car.

Product Specifications:

  • Peak Current: 1200A
  • Starting Current: 600A
  • Car Jump Start Output: 12V
  • USB Output: 5V/2A
  • Gas Engine Rating: Up to 4.0L
  • Operating Temperature: -20℃ to 60℃

Night Emergency and Rescue Lighting:

  1. Equipped with built-in glare lighting system.
  2. Double-click to activate red and blue flash mode; double-click again to exit.
  3. Long-press the middle button for 3 seconds to activate burst mode.
  4. Flashlight mode can be activated for distress signaling by pressing the switch.

Package Includes:

  • 1 Battery clip
  • 1 Instruction manual
  • 1 USB cable
  • 1 Carton packing






  1. Allow approximately 3 hours for the product to fully charge. Activate the product before charging.
  2. Before starting the car, ensure the switch is turned OFF.
  3. Our car power supply varies between peak values of 400A and 600A. The 400A peak product is suitable for starting gasoline-powered cars with a displacement below 4.0. The 600A peak product is suitable for starting diesel vehicles with a displacement below 4.0 and gasoline-powered cars with a displacement below 2.0 (excluding cars with aging engines).
  4. If the product is not used for an extended period, it is recommended to charge it at least once every 3 months.
  5. Store the product at room temperature to optimize its lifespan.

Special precautions for using mobile power:

  1. Ensure the blue plug is securely inserted during car starting to avoid adverse effects on performance.
  2. Prior to starting the car, ensure the blue power indicator shows more than 60% capacity to prolong product lifespan.
  3. If the car fails to start, avoid forcing ignition. Check if the battery clip is properly attached and the car battery terminals are clean. Start after cleaning if necessary.
  4. If the vehicle fails to start after 1-2 attempts, refrain from further attempts. Investigate potential faults before retrying to prevent fuse damage and power supply issues.
  5. During car starting, switch OFF if the clip port is in use for air pumps or other on-board electrical appliances.
  6. Our car power supply features different styles with 400A and 600A ratings. If your car exceeds the product's capacity, automatic power-off protection activates during car starting. Replug the charger and reactivate for normal use.
  7. In the event of total car power loss, directly clamp the car power clip onto the car's positive and negative poles for starting. If the car has power, remove the positive poles, clamp the clip onto the ground iron, and the negative clip onto the negative pole to start.
  8. For the initial car start, deactivate the power in the product, plug in the charger to charge, and then start the car.







View full details